Table of Contents
Advertisement
8-26 Troubleshooting
Wake-On-LAN Function
The Remote Power ON/OFF function (Wake-On-LAN) is disabled immediately after the AC power
is turned on.
Start Windows 2003 once, perform the steps below, and then shut down the system. After restart, the
Remote Power On/Off function is enabled unless the AC power is turned off.
1.
Select [Start] - [Administrative Tools] - [Computer Management].
2.
Select [Device Manager] - [Network Adapter], and double-click [Intel(R) PRO/1000 EB
Network Connection with I/O Acceleration #n]. Set as follows in the [Detail] tab.
PME:
Wake On: [Magic Packet]
Fail to start the OS with the /3GB switch
→ System often fails to start the OS with the /3GB switch.
In this case, please adjust the capacity of the user mode area using the /userva
switch in reference to the following URL.
http://support.microsoft.com/kb/316739/en
[ON]
Advertisement
Table of Contents
Troubleshooting
