Fitness Quest AB LOUNGE XL Owner's Manual page 8

Step 3a. While standing
between the two frames,
PUSH the Foot Rest
Receiver out away from you
through the front frame as
shown in 3a.
Step 3b. The Seat and
Back will start to separate
(open up). Continue push-
ing outward until the Seat
and Back are approximately
2 feet apart as shown in 3b.
5
Short Band
in Front
X15901-1
Front Frame
Step 6. Partially screw the Adjustment Knob into the
underside of the Foot Rest Receiver at the front of the
unit. Pull down the Adjustment Knob and slide the Foot
Rest Assembly into the Receiver. Once the Foot Rest
Assembly is in the Receiver, let the Adjustment Knob
retract making sure it is secure in one of the holes on the
Foot Rest Assembly. Screw the Adjustment Knob by
turning clockwise until tight.
X15908-5
Locking
Knob
3a
FRONT
Back
X15902-1
Foot Rest Receiver
X15903-1
Seat Support Frame
4
Seat
5
4
Long Band
in Rear
X15901-9
Cable
X15901-2
Rear Frame
Handlebar
REAR
Seat
Stand Here And
PUSH Open With
Your Hands
Step 4. Pull the Seat Support Frame toward
you and locate the two holes on the top.
Hook the Long Band over and
attach to the lower hole of the
Seat Support Frame. Hook the
other end of the Long Band into
the hole on the Rear Frame.
Make sure hooks are inserted
completely as shown here.
NOTE: The chair will pivot easily at this
point. Make sure you hold the Frame
firmly in place as you attach the Bands.
4
Step 5. Place the Short Band Hook into the upper
hole on the Seat Support Frame and hook the
other end into the hole on the Front Frame.
SET UNIT UPRIGHT
X15906
Foot Rest Assembly
Step 7. Remove the Locking Knobs from the
Handlebars. Slide the Handlebars into the holes
at the top of the Main Assembly with the curves
facing down. Align mounting hole and secure each
Handlebar with the Locking Knobs you just removed.
Check all bolts and nuts to be sure
they are tight before using your unit.
ASSEMBLY IS NOW COMPLETE.
-------- --------
6
3b
Seat and Back will separate (open up).
Open to approximately 2 feet apart.
Back
Seat
X15902-1
Foot Rest Receiver
X15908-6
Adjustment Knob