Pacific Bicycle Owner's Manual page 71

11/99.bikemanual 11/24/99 3:53 PM
Seat Fixing Bolt
Micro Adjustable
Seat Post
Seat Clamp Nut
Standard
Seat Post
Page 71
The seat fixing bolt and the seat post binder bolt should be checked
for tightness and adjustment every month. On removing the seat post
from the frame, you will notice a mark about 65mm up from the
bottom with the words "max. height" or "minimum insertion".
To avoid damage to either the seat post, the frame
Seat Post
Binder Bolt
or possibly the rider, a minimum of 65mm of the seat
post must always remain in the frame.
Remove the seat post from the frame and wipe off any grease, rust or
dirt. Then apply a thin film of new grease to the part that will be inserted
into the frame. Re-insert, adjust and tighten the seat post in the frame.
64