Pacific Bicycle Owner's Manual page 50

11/99.bikemanual 11/24/99 3:52 PM
3. Temporarily tighten the cable so
that the link wire is at the position in
the illustration.
Link Wire
To u c h i n g
1
43
Page 50
Cable Anchor Bolt
Spring tension
adjustment screw
Cable Casing Holder
2
4. Turn the spring tension
adjustment screw so that the link
wire comes to a position directly
below the cable casing holder.
2 1
5. Secure one of the shoes at a time.
The adjustment of the shoe clearance is
not necessary at this time.
Shoe fixing nut tightening torque:
7.84 - 8.82 Nm (70 - 78 in. lbs.)
1 mm
6. If balance adjustment is necessary,
adjust with the spring tension
adjustment screw.
Cut off any unnecessary
cable, attach an end cap,
and hook it onto the
notched part of the nut
1
2
which secures the shoe.
1
2
10 mm wrench
5 mm Allen key
End cap