Pacific Bicycle Owner's Manual page 36

11/99.bikemanual 11/24/99 3:51 PM
3. While holding the shoe against the
rim, tighten the shoe fixing nut.
1 mm
4. Pass the inner cable through the inner
cable lead. Set the cable with a clearance
of 1mm between each brake pad and the
rim, tighten the cable fixing bolt.
29
Page 36
shoe fixing nut
5 mm Allen key
5 mm Allen key
1mm 1mm
5. Adjust the balance with the spring
tension adjustment screws.
1 mm 1 mm
Spring tension
Spring tension
adjustment screw
adjustment screw
6. Depress the brake lever about 10 times as
far as the grip to check that everything is
operating correctly and that the shoe
clearance is correct before using the brakes.
Depress about
10 times