Enter Rx/Tx Frequency - Sailor System 5000 MF/HF User Manual

3.3

Enter Rx/Tx frequency

Press RX to enter a new Rx frequency.
Enter the new frequency via the keyboard.
Press TX to enter a new Tx frequency.
Enter the new frequency and complete by pressing Enter.
Pressing the Rx softkey copies Rx frequency to the Tx.
Pressing the Tx softkey copies Tx frequency to the Rx.
Pressing the softkey deletes last entry.
Pressing the CANCEL softkey resets the display.
RX tune
To fine tune the Rx value turn the Adjust/Tune knob or press the RX TUNE soft key.
Pressing RANGE softkey more times will toggle the detail of tuning (10Hz, 100Hz or 1kHz)
Turn the Adjust/Tune knob to fine tune the value or use the
Use softkey
value
Last digit always interpreted as "10Hz "- digit.
8
Complete by pressing Enter. Pressing the ENTER softkey is equal to
pressing OK
and to fine tune the
and softkeys.
0735