4.2
DSC setup
Press the Menu button
Select 5. SETUP.
Select 1. DSC SETUP.
Use CHANGE softkey - to change setup
Steps to the next
Use CANCEL softkey - to return to previous display
Change LAT/LON - to manually enter position if no GPS position
Change TIME - to set real time clock if no GPS time and date
TIME and POSITION TIME disappear when information is updated via the NMEA interface.
If not updated via the NMEA interface DATE and TIME must be set manually each time the
equipment is switched on.
An alarm is given if position data is not received via the NMEA interface for 30 seconds. In
this case position information must be entered manually. In case of manual input an alarm is
given when the position information is more than 4 hours old. Any position information is
deleted if not updated for 23½ hours.
14
0735