Table of Contents
Advertisement
Chapter 3
BIOS Description
Power Management Setup
Power Management Setup Menu
ACPI Suspend Type (Default: S1 (POS))
This option is used to set the energy saving mode of the ACPI function.
When you select "S1 (POS)" mode, the power will not shut off and the power
supply status will remain as it is. In S1 mode the computer can be resumed
at any time. When you select "S3 (STR)" mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved in
memory, and the computer can quickly return to previous status when the STR
function wakes. When you select "S1 & S3" mode, the system will automatically
select the delay time.
Soft-Off by PWR-BTTN (Default: Instant-Off)
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When "Instant-Off" is selected, press
the power switch to immediately turn off power. When "Delay 4 Sec." is
selected, press and hold the power button for four seconds to turn off power.
Intruder# Detection (Default: Disabled)
This option is designed to detect the case open status. When enabled, if the
case is opened before power on, BIOS will show a warning message at
startup; if user opens the case after powering on the system, your PC will be
automatically turned off.
Wake-Up by PCI card (Default: Enabled)
This option is used to set the system to wake up by PCI card.
Power On by Ring (Default: Enabled)
If this item is enabled, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an
installed fax/modem. This function needs to be supported by the relevant
hardware and software.
37
865G/GV/PE7MC User Manual
Advertisement
Table of Contents
