Wells WVG-136 Owner's Manual page 21

VENTILATOR MONTHLY CLEANING
PREPARATION: Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY: Monthly
TOOLS: Warm water and a mild detergent
Soft clean cloth or sponge
Plastic scouring pad, plastic scraper
Container for disposal of grease
EXTERIOR
Wash exterior surfaces with a soft clean cloth or sponge dampened
with warm water, mild soap or detergent. Rinse with a soft clean
cloth or sponge dampened with warm water. Allow to air dry.
INTERIOR:
In addition to the weekly cleaning procedure, remove the filter
pack.
Cover the griddle section. Wash the interior surfaces of the
ventilator with warm water, mild soap or detergent and a clean,
soft cloth or sponge. Stubborn or burned-on food debris bay be
removed with a plastic scouring pad or plastic scraper.
Dry thoroughly with a clean soft cloth.
Uncover the griddle and reassemble the ventilator.
Procedure is complete.
CLEANING INSTRUCTIONS (continued)
19
CAUTION:
ELECTRIC
SHOCK HAZARD
Disconnect appliance from
electric power before
cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
cabinet surfaces.