Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
111
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION MANUAL
BUILT-IN
ELECTRIC
GRIDDLES
MODELS
G-136, G-196,
G-236, G-246,
G-606
Includes
INSTALLATION
Model G-136
USE & CARE
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
PRINTED IN UNITED STATES OF AMERICA
303340
07
p/n
Rev. C
ECN-13371
M101
1029 cps
Advertisement
Table of Contents
Related Manuals for Wells G-136
Summary of Contents for Wells G-136
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
- Page 2 (775) 689-5707 or fax (775) 689-5976 if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are for information and other details concerning warranty. SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.
-
Page 3: Specifications
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
TEMPERATURE CONTROL KNOB Fig. 1 Countertop Griddle Features & Operating Controls G-136 Shown - G-196, G-236, G-246 and G-606 are Similar TEMPERATURE Power is applied to the heating elements according to the control knob CONTROL position and the actual temperature sensed at the thermobulb. When the element is energized the heating indicator will glow. -
Page 5: Precautions And General Information
PRECAUTIONS AND GENERAL INFORMATION DANGER: BURN HAZARD Contact with cooking surface cause severe burns. Always wear protective clothing and avoid contact with griddle surface. WARNING: ELECTRIC SHOCK HAZARD All servicing requiring access to non-insulated components must be performed by qualified service personnel. DO NOT open any access panel that requires the use of tools. -
Page 6: Agency Listing Information
AGENCY LISTING INFORMATION This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions. STD 4 This appliance is Underwriters Laboratory recognized ( ). Since this appliance is only a single component of a complete installation, the finished installation of this unit requires additional evaluations to Underwriters Laboratory standards. -
Page 7: Electrical Installation
INSTALLATION (continued) WARNING: ELECTRIC SHOCK HAZARD All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician. DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock. CAUTION: ELECTRICAL INSTALLATION RISK OF... -
Page 8: Operation
HOT SURFACE SEASONING STANDARD AND GROOVED GRIDDLES Exposed surfaces can be As manufactured, the steel surface of your Wells griddle has very hot and may cause microscopic pores. It is important to fill these pores with oil in order severe burns on contact. - Page 9 OPERATION (continued) RECOMMENDED GRILLING TIMES AND TEMPERATURES NOTE: The times and temperatures PRODUCT TEMP ºF TIME in this chart are suggestions only. Your own experience Sausage, link and patty 350º 3 minutes with your own menu items will be your best guide to Bacon 350º...
-
Page 10: Cleaning Instructions - Standard And Grooved Griddles
CLEANING INSTRUCTIONS - STANDARD AND GROOVED GRIDDLES PREPARATION CAUTION: Set temperature control to 220ºF. Allow griddle temperature to drop to 220ºF before BURN HAZARD proceeding. Griddle will be hot during FREQUENCY Daily portions of this cleaning procedure. TOOLS Griddle Brick or Pumice Stone, Fiber Brush Always heat-protective gloves Plastic Scouring Pad, Plastic Scraper and apron. - Page 11 CLEANING INSTRUCTIONS - CHROME PLATED GRIDDLES PREPARATION CAUTION: Set temperature control to 220ºF. Allow griddle temperature to drop to 220ºF before BURN HAZARD proceeding. Griddle will be hot during FREQUENCY Daily portions of this cleaning procedure. TOOLS 4” Razor-Style Scraper, Soft Bristle Brush Always heat-protective gloves Mild Detergent, Non-Abrasive Cleanser and apron.
-
Page 12: Troubleshooting Suggestions
Install properly Griddle drips grease Contact Wells Authorized Service Damaged internal component Agency for repairs NOTE: There are no user serviceable components in the griddle. In all cases of damage or malfunction, contact your Authorized Wells Service Agency for repairs. -
Page 13: Parts And Service
LEGS, 4” , METAL SET OF 4 20563 filters. filters. SPLASHGUARD, FITS G-136 20632 For factory authorized For factory authorized SPLASHGUARD, FITS G-196 20634 service, or to order factory service, or to order factory... - Page 14 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.