Wells WVG-136 Owner's Manual page 14

INSTALLATION (continued)
WARNING
SLIP / FALL
HAZARD
SPILLED OIL
DO NOT OPERATE UNLESS
THE GREASE CUP
TROUGH AND
GREASE DRAWER ARE
INSTALLED.
Oil and moisture will drip onto
the floor and falls may result.
Death or serious injury may
result from slipping and falling
GREASE TROUGH AND GREASE CUP INSTALLATION
1. Install the GREASE TROUGH into the brackets below the grease
baffle.
2. Install the GREASE CUP on the right side of the unit, directly
below the grease trough.
GRIDDLE INSTALLATION
Install GREASE DRAWER in place under the griddle.
ROLL WARMER INSTALLATION
1. Be sure roller catches (inside warmer cavity) are in the open
position. Install drawer assemblies in drawer slides.
2. Place appropriate one drawer insert pan into each warmer drawer.
If used, place one Humitrol rack into each drawer pan.
.
OPTIONAL
HUMITROL
RACK
PRODUCT
PAN
DRAWER
ASSEMBLY
Fig. 7 Roll Warmer Drawer and Pan Installation
12
DRAWER
STOP
LATCH
ASSEMBLY