Read all instructions before operating and servicing the equipment. 1. Table of Contents 1. Table of Contents 2. Safety 3. Wiring Diagram 4. Getting Started 5. Operation 6. Maintenance 7. Trouble Shooting 8. Specifications 9. Warranty 2. Safety Warning! - To reduce the risk of fire, electrical shock or injury please follow these steps: • This machine is for commercial use only and should not be used by untrained personnel.
4. Getting Started Your polisher has been assembled to allow you to operate the machine within a few minutes after removal from the shipping carton. There are several procedures to follow that will ensure a safe and proper start-up. 1. Check the machine over completely after removal from the carton.
6. Maintenance After each use disconnect the power cable from the outlet before installing or removing drive pad, floor pad or performing maintenance on the polisher. 1. Dual/Single Speed Models — Remove the drive pad and floor pad from the machine and clean with fresh water after every use.
Dustbane authorized repair depot, in any way so as, in the judgement of Dustbane Products Limited, to affect adversely its performance and reliability, nor to normal maintenance services and the replacement of service items (including but not limited to electric cord, painted parts, any rubber parts and springs, switch and bearings) made in connection with such services.
Need help?
Do you have a question about the Integra TX SS and is the answer not in the manual?
Questions and answers