Specifications - Viola Systems LEGACY Owner's Manual

SPECIFICATIONS

Class of Output Operation: A
Power Rating:
IM Distortion (SMPTE):
THD:
Frequency Response:
Power Bandwidth:
SN Ratio:
Gain:
Input Impedance:
Inputs:
Output Connections:
Power Consumption:
Weight:
Dimensions:
These specifications are subject to change without notice.
Viola Legacy Manual Rev 0
100W continuous average power into 16, 8, 4, and 2 ohms
20 Hz to 20 kHz at less than 0.25% THD
1W to 100W <0.01%
<0.08% @ 20 kHz/100 watts
1W into 8 ohms (10Hz - 20kHz) +/-0.25 db; 100k <-3 db
5 Hz to 100 kHz (-3dB points)
<-110 db at 1 kHz / 100W; C weighted
26 dB
1M Ohm / 1M Ohm balanced
2 x Balanced - XLR
1 pair of binding posts for spade terminals for each
impedance tap
Approximately 450W at idle
Amplifier:
Height w/Feet:
Width:
Depth w/Binding Posts: 26 1/2".
Page 14 of 14
168 lbs. (76.2kg)
12 3/16". (31.0 cm)
17 9/16" (44.6 cm)
(67.3cm)
14 th February 2009