Table of Contents
Advertisement
IP
Enter the IP address of the camera.
HTTP Port
Assign the HTTP Port for the camera (the default is 80).
RTSP Port
Configure the transmission of streaming data within the network. The default RTSP
(Real Time Streaming Protocol) port is 554.
User ID/Password
Enter the user name and password for accessing the camera.
Cam Vendor
Select the manufacturer of the camera from the list.
PLANET1: ICA-108 / 108W / 120 / 230 / 310 / 312 / 350 / 501 / 525 / 530 / 601 / 651
/ M230 / IVS-110
PLANET2: ICA-M220 / M220W
PLANET3: ICA-510 / 700
PLANET4: ICA151 / 750
Split file
When the recorded file is too large, use this option to split it by selecting file size.
Space
Specify the storage space for the camera.
Motion Enable
Enable of disable the motion detection of the camera (if have).
Recycle
Enable of disable the recycling function when the storage space on the device is full.
Limit
Select Yes to limit the recording file by specifying the storage volume from the list.
Otherwise, select No to record without limitation.
When completed, click Next to set up the schedule for using the camera, and then click
Apply to add it to the list.
You can then change the configuration of the camera by selecting it from the list and then
clicking Edit. To remove a camera, select it and then click Delete.
- 32 -
Advertisement
Table of Contents
