Jeep Cherokee 2014 Owner's Manual page 518

516 STARTING AND OPERATING
6. Using a ballpoint pen or similar object, press and hold the
recessed transfer case NEUTRAL (N) button (located by
the selector switch) for four seconds. The light behind the
NEUTRAL (N) symbol will blink, indicating shift in
progress. The light will stop blinking (stay on solid) when
the shift to NEUTRAL (N) is complete.
Neutral Switch
7. After the shift is completed and the NEUTRAL (N)
light comes on, release the NEUTRAL (N) button.
8. Start the engine.
9. Shift the transmission into REVERSE.
10. Release the brake pedal for five seconds and ensure
that there is no vehicle movement.
11. Shift the transmission to NEUTRAL.
12. Apply the parking brake.
13. Turn OFF the engine. For vehicles with Keyless
Enter-N-Go™, press and hold the ENGINE START/
STOP button until the engine shuts off.
14. Shift the transmission into PARK and remove the key
fob.