Jeep Cherokee 2014 Owner's Manual page 197

To change between the different cruise control modes,
press the ADAPTIVE CRUISE CONTROL (ACC) ON/
OFF button which turns the ACC and the NORMAL
(Fixed Speed) CONTROL OFF. Pressing of the NORMAL
(Fixed Speed) CRUISE CONTROL ON/OFF button will
result in turning ON (changing to) the Normal (Fixed
Speed) Cruise Control mode.
WARNING!
In the Normal (Fixed Speed) Cruise Control mode,
the system will not react to vehicles ahead. Be sure to
maintain a safe distance between your vehicle and
the vehicle ahead. Always be aware which mode is
selected. Failure to follow these warnings can result
in a collision and death or serious personal injury.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195
To Set A Desired Speed
Turn the Normal (Fixed Speed) Cruise Control ON.
When the vehicle has reached the desired speed, press
the SET (+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the selected
speed. Once a speed has been set a message CRUISE
CONTROL SET TO MPH/KM will appear indicating
what speed was set. An indicator CRUISE will also
appear and stay on in the instrument cluster when the
speed is set.
To Vary The Speed Setting
When the Normal (Fixed Speed) Cruise Control is set,
you can increase speed by pushing the SET (+) button. If
the button is continually pressed, the set speed will
continue to increase until the button is released, then the
new set speed will be established.
3