Shift Positions; Shifting Procedures - Jeep Cherokee 2014 Owner's Manual

2014 cherokee

Hide thumbs Also See for Cherokee 2014:

Table of Contents

Shift Positions

For additional information on the appropriate use of each

4WD system mode position, see the information below:

This range disengages the driveline from the powertrain.

It is to be used for flat towing behind another vehicle.

Refer to "Recreational Towing" in "Starting and Operat-

ing" for further information.

This range is for low speed four-wheel drive. It forces the

front and rear wheels to rotate at the same speed. It

provides additional traction and maximum pulling

power for loose, slippery road surfaces only. Do not

exceed 25 mph (40 km/h).

NOTE: Refer to "Selec-Terrain® – If Equipped" for fur-

ther information on the various positions and their

intended usages.

Shifting Into 4WD LOW

With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the

ignition switch in the ON position or the engine running,

shift the transmission into NEUTRAL, and press the

"4WD LOW" button once. The "4WD LOW" indicator

light in the instrument cluster will begin to flash and

remain on solid when the shift is complete.

STARTING AND OPERATING 407

Table of Contents