Jeep Cherokee 2014 Owner's Manual page 366

364 UNDERSTANDING YOUR INSTRUMENT PANEL
Temperature Control
Use this control to regulate the tempera-
ture of the air inside the passenger com-
partment. Rotating the knob counter-
clockwise, from top center into the blue
area of the scale, indicates cooler tem-
peratures. Rotating the knob clockwise,
into the red area, indicates warmer
temperatures.
Air Conditioning Operation
Push the A/C button to engage the Air Conditioning (A/C).
A LED will illuminate when the A/C system is engaged.
MAX A/C
For maximum cooling, when MAX A/C is selected the A/C
is turned on automatically and the air is recirculated.
NOTE: A/C cannot be deselected when in MAX A/C
position. The LED will blink three times if the A/C
button is pushed. If your air conditioning performance
seems lower than expected, check the front of the A/C
condenser (located in front of the radiator), for an accu-
mulation of dirt or insects. Clean with a gentle water
spray from behind the radiator and through the con-
denser. Fabric front fascia protectors may reduce airflow
to the condenser, reducing air conditioning performance.
Mode Control (Air Direction)
Mode control allows you to choose
from several patterns of air distribu-
tion. You can select either a primary
mode, as identified by the symbols, or
a blend of two of these modes. The
closer the control is to a particular
mode, the more air distribution you
receive from that mode.