West Marine 14286801 Owner's Manual page 8

GENERAL OPERATION
12/24-hour Clock
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10 : 00). In European frequency spacing mode, the
clock will display 24-hour time (22:00).
Audio
Press AUDIO momentarily to select between Bass, Treble, Balance,
Fader, Equalizer, Subwoofer and Source Volume Level.
BASS TREBLE BALANCE FADER EQ SUBWOOFER SOURCE LEVEL
Bass
Press AUDIO until BASS appears, then rotate volume knob
left/right to adjust ( -6 minimum / +6 maximum).
Treble
Press AUDIO until TREBLE appears, then rotate volume knob left/
right to adjust ( -6 minimum / +6 maximum).
Balance
Press AUDIO until BALANCE appears, then rotate volume knob
left/right to adjust (BALANCE LEFT 12 - BALANCE RIGHT 12).
BALANCE EVEN represents equal balance.
Fader
Press AUDIO until FADER appears, then rotate volume knob
left/right to adjust (FADER FRONT 12 - FADER REAR 12).
FADER EVEN represents equal fader.
EQ Press AUDIO until EQ appears, then rotate volume knob
to select from the following equalization curves: FLAT (default), POP,
JAZZ, CLASSIC, BEAT, ROCK and USER. Any manual adjustments to
the bass and treble settings are automatically saved as USER.
Subwoofer Press AUDIO until SUBWFR appears, then rotate volume knob
left/right to adjust (0 minimum / +12 maximum).
Note:
Subwoofer option will not appear if the REAR/SUB option in
the setup menu is set to REAR. Refer to page 7 for details.
Source Volume Level
The source volume level control allows a gain adjustment for each
audio source: AM, FM, WB, AUX FRONT/REAR, operation of iPod,
USB, SD card, Bluetooth and SiriusXM. Set the source volume level
for each mode, depending on the relative volume of each audio
source.
To set the source volume level, press AUDIO until SOURCE LEVEL
appears. After one second, the current mode will appear on the
display. Turn the volume knob to adjust the audio level of the
current source (-6 minimum/+6 maximum).
Note: Only the current mode will be available for adjustment. To
adjust another mode of operation, press MODE until the desired
mode is selected, then set the source volume level for that mode.
WM4000 8 1-800-BOATING