Before You Start; Getting Started - West Marine 14286801 Owner's Manual

PREPARATION
Please read entire manual before installation.

Before You Start

• D isconnect negative battery terminal. Consult a qualified technician for instructions.
• A void installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Remove trim ring and mounting sleeve from the unit.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
• Certain vessels may require an installation kit and/or wiring harness adapter (sold
separately).
• Test for correct operation and slide into mounting sleeve to secure.
• Snap trim ring into place.
Insert the mounting sleeve into the vessel's
dash panel or installed splashguard
Bend multiple mounting tabs around the
mounting sleeve until the mounting sleeve
Connect all wiring harnesses and slide the
head unit into the mounting sleeve until it
Step 1:
Step 2:
is secure
Step 3:
clicks into place
WM4000
Vessel Dash Panel or Splashguard
Mounting Tabs
Vessel Dash Panel or Splashguard
WM4000 Head Unit
2 1-800-BOATING
Vessel Dash Panel or Splashguard
Mounting Sleeve
Mounting Sleeve
Mounting Sleeve