During A Phone Call - West Marine 14286801 Owner's Manual

®
BLUETOOTH OPERATION
Volume
Microphone Mute
Audio Transfer
Call Waiting
Function
Bluetooth
Auto Connect
Auto Answer
Speaker
Output
(FRONT/ALL)

During a Phone Call

Turn the volume knob to adjust the volume level during a phone
call. Bluetooth mode has a separate volume level from the main
volume of other modes. The WM4000 will remember the volume
level in Bluetooth mode and always return to the last volume level for
each phone call.
Press MUTE during a phone call to turn the WM4000's external
microphone off. Press MUTE again to resume microphone operation.
Press DISP during a phone call to transfer the call from the WM4000
to the cell phone. Press DISP again to toggle the audio back to the
WM4000.
During a phone call, if there is a second incoming call, press
place the first call on hold and switch to the second phone call. Press
again to switch back to the first call.
Note: Audio transfer and call waiting must be supported by the
mobile phone and service provider to function properly.
Bluetooth Setup Menu Options
Options
BL'TOOTH
Enables/disables Bluetooth functionality.
(ON/OFF)
AUTO CON Set to ON to allow a Bluetooth device to connect automatically. Setting
(ON/OFF) to OFF requires manually connecting the device.
When set to ON, every incoming phone call will automatically be
AUTO ANS answered after 2-3 rings.
(ON/OFF) When set to OFF, the
phone calls.
Set to FRONT to direct the Bluetooth audio output to the front speakers
BT SPRKS
only.
Set to ALL to enable Bluetooth audio to output from all 4 speakers.
WM4000
Action
button must be pressed to answer incoming
24 1-800-BOATING
to