Cleaning & Care - Pyramid 5000+ User Manual

AUTO TOTALING TIME CLOCK INSTRUCTIONS
+
Model 5000 /5000
CLEANING TIME CLOCK
Maintain Peak Performance
o
Prolong Life of Time Clock
o
WHEN TO CLEAN
Every 6 months (Office Environment)
o
As required (HD Environment-workplace with high dust/dirt/debris)
o
Incomplete or Light Printing
o
WHAT TO CLEAN WITH
Can of Compressed Air
o
Rubbing Alcohol
o
Foam Applicator
o
Non-penetrating Oil (such as 3-in-1 oil)
o
Clean, Dry Cloth
o
HOW TO CLEAN
Unlock & remove time clock cover.
Use canned air to blow out debris from
time card slot, paying close attention to
the sensor area on left hand side of card
slot.
Using cloth, wipe down ribbon carriage
rod then disperse a few drops of oil on
rod.
Remove ribbon cartridge from time clock
& use foam applicator dampened with
rubbing alcohol to clean the exposed
print head.
With ribbon removed, run a time card
through the clock 10-15 times. This
procedure will remove any ink build up
from the print head. If there is no ink on
the time card, add a little more alcohol.
The print should start to darken, & then
lighten up as you continue to run the
card through the clock.
Reinstall ribbon, replace & lock time
clock cover.
pyramidtimesystems.com
+
HD
Ribbon Carriage Rod
CLEANING & CARE
Card Slot
Sensor Area
Print Head
13