Cleaning & Care - Pyramid 4000Pro User Manual

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 4000Pro/5000
CLEANING THE CLOCK
◦
Maintain Peak Performance
◦
Prolong Life of Time Clock
WHEN TO CLEAN
◦
every 6 months (Office Environment)
◦
As required (HD Environment-workplace with high dust/dirt/debris)
◦
Incomplete or Light Printing
WHAT TO CLEAN WITH
◦
Can of Compressed Air
◦
Rubbing Alcohol
◦
Foam Applicator
◦
Non-penetrating Oil (such as 3-in-1 oil)
◦
Clean, Dry Cloth
HOW TO CLEAN
1
Unlock & remove time clock cover.
2
Use canned air to blow out debris from
time card slot, paying close attention to
the sensor area on left hand side of card
slot.
3
Using cloth, wipe down ribbon carriage
rod then disperse a few drops of oil on
rod.
4 Remove ribbon cartridge from time clock
& use foam applicator dampened with
rubbing alcohol to clean the exposed
print head.
5
With ribbon removed, run a time card
through the clock 10-15 times. This
procedure will remove any ink build up
from the print head. If there is no ink on
the time card, add a little more alcohol.
The print should start to darken, & then
lighten up as you continue to run the
card through the clock.
6 Reinstall ribbon, replace & lock time
clock cover.
pyramidtimesystems.com
/5000 HD
+ +
Card Slot
2
Sensor Area
3
Ribbon Carriage Rod
CLEANING & CARE
Print Head
4
15