Special Settings; Setting Television Channels - Grundig Xentia MFS 72-4610/8 TOP Operating Manual

Channel settings
System BG
Channel C 06
< >
Search
Fine Tune 00
Program No 01
Child Lock Off
Store
Autoprogram
F Back
Exit
i
Channel settings
System BG
Channel C 06
< >
Search
Fine Tune 00
Program No 01
Child Lock Off
Store
Autoprogram
F
Back
Exit
i

SPECIAL SETTINGS

Setting television channels

This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
i
Press » « to open the »MAIN MENU«.
1
– The »MAIN MENU« appears.
2 Select »Channel settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel settings« menu appears.
Select »Program No« with »P+« or »P-« and set the preset
3
channel with » « or » «.
Select »Search« with »P+« or »P-« and start the search with
4
» « or » «.
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Select »Store« with »P+« or »P-« and confirm with »OK«.
5
– The »Stored« message appears.
Note:
To set other television stations, repeat steps
i
6 Press » « to finish the setting.
______________________________
to 5.
3
25