Table of Contents
Advertisement
MAIN MENU
Sound
Picture
Preset list
Channel settings
Settings
i
Exit
Select
Sound
Volume
Balance
Sound type
Stereo
Sound mode
Normal
AVL
Off
Dynamic Bass
On
Equalizer
Headphone
F
Back
i
Exit
Sound
Volume
Balance
Sound type
Stereo
Sound mode
Normal
AVL
Off
Dynamic Bass
On
Equalizer
Headphone
F
Back
Exit
i
SETTINGS
Audio settings
i
Press »
« to open the »MENU«.
1
– The »MENU« appears.
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Note:
Further operation is explained in the following sections.
Volume
The standard volume is set here. This is the volume of the device
after switching on.
1
Select »Volume« with »P+« or »P-« and adjust the setting with
» « or » «.
Balance
Select »Balance« with »P+« or »P-« and adjust the setting with
1
» « or » «.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
Select »Sound type« with »P+« or »P-« and adjust the setting
1
with » « or » «.
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
Select »Sound mode« with »P+« or »P-«.
1
Press » « or » « to select the setting.
2
______________________________________________
11
Advertisement
Table of Contents
