Using External Devices; Decoder Or Satellite Receiver; Headphones - Grundig Xentia MFS 72-4610/8 TOP Operating Manual

A U D IO
V ID E O
S
S -V H
Headphone
Volume
Balance
Bass
Treble
Sound Type Stereo
22

USING EXTERNAL DEVICES

Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.

Decoder or satellite receiver

In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
Decoder
PAY-TV
1
Using a decoder
1
2

Headphones

Connecting headphones
1
Selecting the sound settings for the headphones
1
2
3
F
Back
Exit
i
4
5
Connect the »AV1« socket on the television set and the appro-
priate socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Switch on the television and the decoder.
Select the »AV1« preset channel by pressing »AV« repeatedly
until »AV1« appears on the screen.
Insert the headphone jack (3.5 mm ø jack plug) in the head-
phone socket on the television.
i
Press » « to open the »MAIN MENU«.
Select »Sound« with »P+« or »P-« and confirm with »OK«
Select »Headphone« with »P+« or »P-« and confirm with
»OK«.
Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type«
with »P+« or »P-« and set with » « or » «.
i
Press » « to finish the setting.
_______________
L
AV3
AUDIO
OUT
R
AV2
AV1