Agilent Technologies 34972A User Manual page 220

Chapter 5 Error Messages
Execution Errors
Header suffix out of range
-114
A header suffix is the number that can be appended to the end of some
command headers. This error is generated if an invalid number is used.
Example: OUTP:ALARM5:SOURCE ("5" is not a valid alarm number)
Invalid character in number
-121
An invalid character was found in the number specified for a parameter.
Example: TRIG:TIMER 12..34
Numeric overflow
-123
A numeric parameter was found whose exponent was too large for this
command. Example: CALC:SCALE:GAIN 1E34000
Too many digits
-124
A numeric parameter was found whose mantissa contained more than
255 digits, excluding leading zeros.
Numeric data not allowed
-128
The wrong parameter type was found in the command string. You may
have specified a number where a string or expression was expected, or
vice versa. Examples: DISP:TEXT 5.0 or ROUT:CLOSE 101
Invalid suffix
-131
A suffix was incorrectly specified for a numeric parameter. You may have
misspelled the suffix. Example: ROUT:CHAN:DELAY 5 SECS
Suffix too long
-134
A header suffix is the number that can be appended to the end of some
command headers. This error is generated if the header suffix contains
more than 12 characters.
Suffix not allowed
-138
A parameter suffix was specified when one was not allowed.
220