8-2. Interface Circuit
8-2-1. RS-232C
Input (RXD, CtS)
Output (DtR, FaUlt, tXD, RCH, RtS)
Figure 8-1. RS232-C Interface
8-2-2. Current Loop
Input (ttY-RXD, ttY-RXDR)
Output (ttY-tXD, ttY-tXDR)
Note: Resistance should be set so that Current Loop is restricted to the range of
10 ~ 20 mA.
Figure 8-2. Current Loop Interface
– 26 –