Table of Contents
Advertisement
8. INTErfacE fOr mOdEL dp8340rd
8-1. Interface Specifications
(1) Synchronization system : asynchronous
(2) Baud rate :
(3) World length :
Start bit:
Data bit:
Parity bit:
Stop bit:
(4) Signal polarity :
RS-232C
Current loop
(5) Handshaking :
1 DtR Mode (1 block)
2 X-ON/X-OFF Mode
3 StX-etX Mode
Note: STX-ETX Mode may use DTR or X-ON/X-OFF, selected by DIP SW 1-5.
See Chapter 9. for details.
( d-sUb 25 pIN cONNEcTOr )
150, 300, 600, 1200, 2400, 4800, 9600 bps
(Selectable)
1 bit
7 or 8 bits (Selectable)
Odd, even, or None (Selectable)
1 or 2 bit length (Selectable)
MaRk : logic "1" (–3V to –25V)
SPaCe : logic "0" (+3V to +25V)
MaRk : logic "1" (Current ON)
SPaCe : logic "0" (Current OFF)
1 Start bit
2 Data bits
3 Parity bit
4 Stop bit
– 25 –
Advertisement
Table of Contents
