Yaesu VX-8GR Operating Manual page 30

R
C
It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct ("Simplex") range.
To do this, just press the
uplink frequency. Press the
return to normal monitoring of the repeater downlink (output)
frequency. While you are listening on the input frequency of the
repeater using the
will blink.
The configuration of
input frequency of a repeater, or "HM" (for instant switching to the "Home"
channel for the band you are operating on). To change the configuration of
key, use Set Mode Item 34: HOME/REVERSE. See page 135.
28
O
R
key. You'll notice that the display has shifted to the repeater
key again to cause operation to
key, the repeater offset icon ("
U I
" or
key may be set either to "RV" (for checking the
VX-8GR O
F
")
M