Yaesu VX-8GR Operating Manual page 113

The attenuator will reduce all signals (and noise) by 10 dB, and it may be used to make
reception more pleasant under extremely noisy conditions.
1. Set a band ("A-Band" or "B-Band") on which you wish to activate the "attenuator" to
the "Operating" Band (indicated in large character).
2. Press and hold the
3. Rotate the DIAL knob to select Set Mode Item 1: ANTENNA
ATT.
4. Press the
Mode Item.
5. Rotate the DIAL knob to change the setting from "OFF" to
"ON".
6. When you have made your selection, press the PTT key to
save the new setting and exit to normal operation.
7. If you wish to disable the attenuator, just repeat the above procedure, rotate the DIAL
knob to select "OFF" in step "5" above.
1) When the attenuator is activated, the " " icon
will appear on the display.
2) The attenuator can be set independently on each
operating band of the "A-Band" and "B-Band".
VX-8GR O
ATT F
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
M
M
ISCELLANEOUS
E A
S
ETTING
111