Yaesu VX-8GR Operating Manual page 143

S M I 67: PRI TIME
ET ODE TEM
Function: Selects the time between the Priority (Dual Watch) channel checks, when the
feature is active.
Available Values: 0.1sec ~ 0.9sec (0.1sec/step) or 1.0sec ~ 10.0sec (0.5sec/step)
Default: 5.0sec
S M I 68: PTT DELAY
ET ODE TEM
Function: Selects the time delay before the carrier is transmitted, when the PTT switch is
pressed.
Available Values: OFF / 20ms / 50ms / 100ms / 200ms
Default: OFF
S M I 69: RPT ARS
ET ODE TEM
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON / OFF
Default: ON
S M I 70: RPT SHIFT
ET ODE TEM
Function: Sets the Repeater Shift Direction.
Available Values: SIMPLEX / –RPT / +RPT
Default: SIMPLEX
S M I 71: RPT SHIFT FREQ
ET ODE TEM
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.000MHz ~ 150.000MHz (50 kHz/step)
Default: Depends on the operating band and transceiver version.
S M I 72: RX MODE
ET ODE TEM
Function: Sets the receiving mode.
Available Values: AUTO / NFM / AM
Default: AUTO (Mode automatically changes according to operating frequency).
S M I 73: SAVE RX
ET ODE TEM
Function: Selects the Receive-mode Battery Saver interval ("sleep" ratio).
Available Values: 0.2sec ~ 0.9sec (0.1sec/step), 1.0sec ~ 9.5sec (0.5sec/step), or 10.0sec
~ 60.0sec (5sec/step)
Default: 0.2sec
S M I 74: SAVE TX
ET ODE TEM
Function: Enables/Disables the Transmitter Battery Saver.
Available Values: ON / OFF
Default: OFF
VX-8GR O
S M S
M
S
ET
D
M
ODE
141