Foot Platform Angle Adjustment; Swing-Away Footrests; Elevating Leg Rests (Optional); Heavy Duty Drop-In Leg Rests - Quantum 6000 Owner's Manual

V . C O M F O R T

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex
key.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew. See
figure 22.
2. Loosen the nut securing the setscrew.
3. Turn the setscrew counterclockwise to raise the front
of the foot platform or clockwise to lower the front of
the foot platform.
4. Tighten the nut to secure the setscrew.

Swing-away Footrests

Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 23.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the back of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.

Elevating Leg Rests (Optional)

Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 24.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
28
A D J U S T M E N T S
FOOTREST
EXTENSION
Figure 23. Swing-Away Footrests
LEG REST
EXTENSION
Figure 24. Elevating Leg Rests
ADJUSTMENT BOLT
LEG REST ADJUSTMENT
SCREWS
Figure 25. Heavy Duty Drop-In Leg Rests
www.quantumrehab.com
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER A
RELEASE LEVER B
ADJUSTMENT
SCREWS
LEG REST
HANGER
Quantum 6000