Step 5
Lift the cart sides up into place
on each side of the cart. Cart
sides will secure into place with
pre-attached bolts on each cart
leg. Tighten bolts securely.
Step 6
Swing tank heat shield up and
place onto hook on the back of
the door bracket.
Step 7
Attach tank holder down into hole
of cart base using three
plastic rivets.
Step 8
Insert the block bar end that has no
screw hole into the slot on the back
panel. Attach the other end to the
pre-attached M6 bolt on the bottom
shelf, push it to the narrow end of
the key hole and tighten up the bolt.
25
Tank Heat
Shield
Bolts
Tank Block Bar