Ddns & Upnp - LevelOne FCS-1040 User Manual & Spare Parts Catalogue

DDNS & UPnP
"Enable DDNS" This option turns on the DDNS function.
"Provider" The provider list contains four hosts that provide DDNS services. Please connect to
the service provider's website to make sure the service charges.
"Host Name" If the User wants to use DDNS service, this field must be filled. Please input the
hostname that is registered in the DDNS server.
"Username/E-mail" The Username or E-mail field is necessary for logging in the DDNS server or
notify the User of the new IP address. Note: when this field is input as "Username" the following
field must be input as "Password".
"Password/Key" Please input the password or key to get the DDNS service.
"Enable UPnP" This turns on or off the UPnP function. When UPnP is turned off, the camera
cannot be found through network neighbors in MS Windows XP. If the UPnP network component
is installed in Windows XP, the hostname of the Network Camera will be shown with bracketed IP
address in the Network neighbors. Ex: Network Camera with Pan/Tilt (xxx.xxx.xxx.96). That is:
The hostname of the Network Camera is "Network Camera with Pan/Tilt", and the IP address of
the Network Camera is xxx.xxx.xxx.96, depends on the last value of the IP address assigned to
the Network Camera.
"Save" Click on this button to save current settings for the DDNS service and UPnP function.
<url> http://<Network Camera>/setup/ddnsupnp.vspx
<Network Camera> is the domain name or original IP address of the Network Camera.