Table of Contents
Advertisement
Loading Audio Files to Sonorous:
Step 1: Verify that the unit has power and is turned on. If the unit is just being turned on allow about 30 seconds
for it to initialize before going to next step.
OUTPUT
15VDC
VOLUME
1.67A
600Ω
8Ω
POWER
SPEAKER
RESET
STATUS
ON
OFF
OFF
ON
Step 2: Press the EJECT button on the front of the unit.
EJECT
Step 3: Place a CD with MP3 files (formatted as a DATA CD, not an AUDIO CD) in the tray.
Step 4: Press the EJECT button or lightly push the drawer to close it.
OUTPUT
Step 5: The Sonorous will load the audio files from the CD to it's internal flash memory. While loading the
15VDC
STATUS LED will change from BLINKING ORANGE to a SOLID GREEN. If an invalid CD is encountered the
VOLUME
1.67A
600Ω
8Ω
Sonorous will automatically open the drawer and the STATUS LED will be BLINKING RED.
POWER
STATUS
OFF
ON
Step 6: Once completed the CD can be left in the unit or removed.
6
Advertisement
Table of Contents
