NOTE
LCD Operation
The N0503 is equipped with an LCD on the front for easy status display and setup.
There are four buttons on the front panel to control the LCD functions.
LCD Controls
Use the Down (
), Up (
▼
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon
Function
Down Button
▼
Up Button
▲
↵
Enter
ESC
Escape
Display Mode
During normal operation, the LCD will be in Display Mode.
Display Mode
Item
Host Name
WAN
LAN
RAID
System Fan
Temperature
Date/Time
Up Time
The N0503 will rotate these messages every three seconds on the LCD display.
NOTE
The Thecus Setup Wizard is designed for installation on systems running Windows
XP/2000 or Mac OSX or later. Users with other operating systems will need to
install the Thecus Setup Wizard on a host machine with one of these operating
systems before using the unit.
↵
), Enter (
) and Escape (ESC) keys to operate LCD to
▲
Description
Select the previous configuration settings option.
Select the next configuration settings option.
Enter to display USB copy operation.
Escape to give up USB copy.
Press and hold for 3 seconds to turn off the LCD's backlight. Press
any button to switch the backlight back on.
Description
Current host name of the system.
Current WAN IP setting.
Current LAN IP setting.
Current RAID status.
Current system fan status.
Current system temperature.
Current system date and time
The system power on time since last start
If the RAID array is in a degraded state, the LCD display will be stopped in
display mode and show which disk is degraded in the array:
19