Manual Setup - 5Ghz Band - D-Link AC750 User Manual

The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being config-
Enable Wireless: Check the box to enable the wireless func-
Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The
802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least
Wireless Channel: If Auto Channel Scan is not enabled, users can manually select a wireless channel. By default the channel is set to
Transmission Rate: Select the transmission rate. It is strongly suggested to select Best (Automatic) for best performance.
Channel Width: When using the 802.11n frequency band, user have an option to choose between a 20 MHz, 20/40 MHz, or
Visibility Status: This option allows you to adjust the visibility of your SSID. If Visible is selected, the SSID of your wireless network
D-Link DIR-810L User Manual

Manual Setup - 5Ghz Band

ured. The following configuration relates
to the 5GHz band.
tion at all times. If you do not want to use
wireless, uncheck the box to disable all
wireless functions. To set a schedule for
the times when you want the wireless net-
work to be available, click on the Add New
button to specify a new schedule.
SSID is case-sensitive.
amount of interference.
36. The channel can be changed to fit the channel setting for an existing wireless network or to customize the wire-
less network.
20/40/80 MHz bandwidth for 802.11ac.
will be visible to any wireless clients within range of the signal. If Invisible mode is selected, clients must search for
the SSID of your wireless network manually in order to connect to the network.
48