D-Link AC750 User Manual page 60

Section 3 - Configuration
Learn NetBIOS If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this
from WAN:
setting off to configure manually.
NetBIOS Scope:
This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS domain name under which network
hosts operate. This setting has no effect if Learn NetBIOS information from WAN is activated.
NetBIOS Node: This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node indicates a Hybrid-State
of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you
have configured WINS servers. M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed
to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast
operations which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such
as servers and printers are local to the LAN. P-Node indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS
operations to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working
WINS server. B-Node indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available,
however, it is preferred that you try M-Node operation first. This setting has no effect if the Learn NetBIOS information from WAN
option is activated.
WINS IP
Enter your WINS Server IP address(es).
Address:
D-Link DIR-810L User Manual 56