Source Setup; Source Setup Operation; Source Layout Setting; Disc Setting - Alpine INE-W947E Owner's Manual

Source Setup

Source Setup Operation

The following steps 1 to 5 are common operations to each
"Setting item" of Audio Setup. Refer to each section for details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [
(Source)].
The Source Setup screen appears.
3
Select the desired item.
Setting items: Source Layout / Disc / AUX / RSE
4
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [ ] to return to the previous screen.
• Immediately after changing the Source Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.

Source Layout Setting

[Source Layout] is selected on the Source setup menu in step 3.
Refer to "Source Setup Operation" (page 44).
You can set whether to switch sources by tracing the middle of the
Audio/Visual Playback screen from right to left or from left to right.
Refer to "Switching Sources" (page 22).
Setting item: Slide Source Change
Setting contents: On (Initial setting) / Off
On:
Source is changed by tracing
Off:
Source is not changed by tracing
44
-EN

Disc Setting

Touch [Disc] on the Source setup menu in step 3. Refer to "Source
Setup Operation" (page 44).
• You can perform DVD setup in DVD video mode.
• Touch [Stop] before performing Disc setup.

Changing the language setting

The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
if you always want to listen in English, for example. (The language
setting is not effective on some discs. In this case, the default language
is set at the factory.)
• When the settings are changed, old settings are overwritten. Make a
note of the current settings before making changes.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section "Switching the Audio Tracks" (page 32).
• If the disc does not include the selected language, the disc's default
language is set.
To play in a language other than those displayed
1 Touch [DVD Menu Language Code], [Audio Language
Code] or [SUBT Language Code].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
To reference language numbers, refer to "List of
Language Codes" (page 72).
3 Touch [OK] to memorise the number.
] to
• The setting content changes to "Other" if the desired language code
is input.

Setting of the Menu Language

Set the language used for the menus (title menu, etc.).
Setting item: DVD Menu Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
• When "Auto" is selected, the primary menu language among the
recorded ones is played.
• As for the language abbreviation, refer to "List of Language Codes"
(page 72).

Setting of the Audio Language

Set the audio language produced from the speakers.
Setting item: Audio Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
• When "Auto" is selected, the primary audio language among the
recorded ones is applied.
• As for the language abbreviation, refer to "List of Language Codes"
(page 72).
SE / RU / CN
SE / RU / CN