Setup; Source Setup; Source Setup Operation; Radio Setup - Alpine iXA-W407BT Owner's Manual

Setup

Source Setup

Source Setup Operation

The Parking Brake must be engaged to access the Source
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
"Setting item" of Source Setup. Refer to each section for details.
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of Source Setup.
The SOURCE SETUP screen appears.
3
Touch the title of your desired setup mode.
Radio Setup/Bluetooth Setup*
1
* Displayed when "Bluetooth IN" is set to BUILT-IN (page 23).
• When the current source is Radio, USB or iPod, you can also recall
the SETUP list of the current source directly by pressing SETUP.
4
Touch [ ], [ ] or [
change its setting.

Radio Setup:

2
RDS Clock Disp * / FM Level / PI Seek / RDS Regional /
PTY Language / PTY31
2
* Displayed only when T/ZONE is OFF (page 19).
Bluetooth Setup:
Paired Device / Device Search / Clear Device / Service Provider /
Visible Mode / Auto Answer / Speaker Sel / Mic Input /
Firmware Version / Firmware Update
• For BLUETOOTH Setup details, refer to "BLUETOOTH Setup"
(page 40).
USB Setup:
Playlists / Artists / Albums / Podcasts / Audiobooks / Genres /
Composers / Songs / Skip Style
5
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
16
-EN
1
/USB Setup
], etc. of the desired item to
Radio Setup
"Radio Setup" is selected on the source setup main menu in step 3.

RDS Time Display

When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS Clock Disp
Setting contents: OFF / ON
OFF: To adjust it manually.
ON: Adjusts the clock automatically based on the time data.
In this case, the clock cannot be adjusted manually.

Adjusting Source Signal Levels

If the difference in volume level between the iPhone/iPod and FM radio
is too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting contents: LOW / HIGH

PI Seek Setting

When the PI Seek is set to "AUTO", the unit searches again for a station
in the PI (Programme Identification) list.
Setting item: PI Seek
Setting contents: OFF / AUTO

Receiving RDS Regional (Local) Stations

When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
Setting item: RDS Regional
Setting contents: OFF / ON

Switching the Display Language of PTY (Programme Type)

You can select one of the patterns of the display languages.
Setting item: PTY Language
Setting contents: GB / NL / F / D / I / E

Setting PTY31 (Emergency Broadcast) Reception

PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to ON.
• The unit will show "ALARM" in the display during PTY31 reception.