Set Your Favourite Source To The Fav Button (Fav Setup); Set Your Favourite Source; Recall Your Favourite Source; Setup - Alpine CDE-123R Owner's Manual

Set your favourite source to the FAV button
(FAV SETUP)
FAV

Set your favourite source

1
Press and hold FAV for at least 2 seconds to activate FAV
setup mode.
2
Turn the Rotary encoder to select a favourite source, and
then press ENTER.
The favourite source is set.
Notes
• If you do not want to use this function, select "OFF".
• If no operation is performed for 10 seconds, the unit automatically
returns to normal mode.

Recall your favourite source

Once a source is set to FAV button, press FAV to recall the
source directly.
Note
• Depending on the setting, even though you set a source to FAV, it may
not be available, For example, when you set AUX as your favourite
source and OFF is set in "Setting the AUX SETUP Mode" (refer to
"Setting the AUX SETUP Mode" on page 21), the AUX source will not
be recalled by pressing FAV.

SETUP

Rotary encoder/ /ENTER
AUDIO/SETUP
FAV 



Setting

Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
*1
 GENERAL  AUDIO
BLUETOOTH
iPod & USB
(e.g. Select GENERAL)
BLUETOOTH:
*3
BT IN  BT MENU
GENERAL:
*4
 PLAY MODE  INT MUTE
FAV SETUP
*6
 AUX SETUP  AUX NAME
AUX-R NAME
*6
 AUX-R GAIN  AUX MIX
DEMO
DISPLAY:
ILLUMINATI  SCROLLTYPE  TEXT SCR
TUNER:
*8 *9
 PI SEEK  ALARM
RDS REG
iPod & USB:
USB SEARCH  USB SKIP
Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO.
Refer to "Sound Setting" on page 16.
Not displayed when BT IN is set to OFF.
You can also set this in "Set your favourite source to the FAV
button (FAV SETUP)" (refer to "Set your favourite source to the
FAV button (FAV SETUP)" on page 19).
Displayed only when BT IN is OFF.
Displayed only when AUX-R SET is set to ON.
Displayed only when AUX SETUP is set to ON.
Refer to "Receiving RDS Regional (Local) Stations" on page 11.
Refer to "PI SEEK Setting" on page 11.
Refer to "Setting PTY31 (Emergency Broadcast) reception" on
page 11.
*2
 DISPLAY  TUNER 
*5
 AUX-R SET 
*7 *7
 AUX GAIN
*7
 CYRILLIC  POWER IC 
*10
 FM-LEVEL
19
-EN