Belt Tracking Adjustment - Spirit F8500 Instruction And User's Manual

10156

BELT TRACKING ADJUSTMENT

If during use you notice that walking belt either shifts to the right or the left of center, first
remove "Safety Key" and unplug equipment from AC power source. Using M6 Allen wrench
provided, turn left rear roller adjustment as indicated below clockwise no more the 1/4" of a
turn. Remove M6 Allen wrench, insert "Safety Key" and insert AC power cord into AC outlet.
Turn on your treadmill and observe after running a few minutes to see if problem has been
corrected. This may take several adjustments, so repeat the above procedure.
page-25