Cleaning Heat Exchanger - AEG Electrolux LAVATHERM 88800 User Manual

2. Pour condensed water out into a ba-
sin or similar receptacle.
3. Slide outlet connections in and refit
condensate tank.
If the programme has been interrup-
ted as a result of the condensate tank
being full: Press the START PAUSE
(START PAUZE) button to continue
the drying cycle.
The condensate tank has a volume of approx. 4 litres. This is sufficient for
around 7kg of laundry which has previously been spun at 1000 revolutions/
minute.
4. The condensed water can be used as
distilled water, e.g. for steam pro-
grammes. However, first filter the
condensed water to remove any resi-
dues and small pieces of fluff.
Using the attached canister to filter: Pour
the water out of the container straight
through the filter at the top of the can-
ister.

Cleaning heat exchanger

If the message: Please clean the condenser is shown in the display, the heat
exchanger needs to be cleaned.
CAUTION!
Operating when the heat exchanger is blocked with fluff can damage the dryer.
This also increases energy consumption.
1. Open door.
39