Cleaning Heat Exchanger - AEG Electrolux LAVATHERM T57830 User Information

125985010 gb.qxp 2006-06-12
2.Pour condensed water out into
a basin or similar receptacle.
3.Slide outlet connections in and
refit condensate tank. If the
programme has been interrup-
ted as a result of the condensa-
te tank being full: Press the
START/PAUSE button to conti-
nue the drying cycle.
The water reservoir has a volume of approx. 4 litres. This is sufficient for around 6 kg of
laundry which has previously been spun at 800 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However
first filter the condensate (e.g. with a coffee filter) to remove any residue
and small pieces of fluff.

Cleaning heat exchanger

If the HEAT EXCHANGER display is illuminated, the heat exchanger needs to
be cleaned.
Caution! Operating when the heat exchanger is clogged with lint can
damage the dryer. This also increases energy consumption.
1. Open loading door
2. Open base door. To do this, press the
release button on the bottom of the
loading opening and open the door to
the left.
3. Remove lint from the inside of the door
and the heat exchange chamber. Wipe
the door seal with a damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat exchan-
ger out of the base and carry it horizon-
tally to prevent any remaining water from
spilling.
6. To empty the heat exchanger, hold
vertically over a washing-up bowl.
13:16 Page 17
17