Introduction - Alpine EZi-DAB Owner's Manual

Introduction

This manual provides instructions for using EZi-DAB. EZi-DAB is designed for professional installation and
there are a number of different options for how EZi-DAB can be connected to your existing Head Unit.
Your installer will be able to advise you which method has been used and give you some basic instruction
on how to operate EZi-DAB in your car.
There are three main components to EZi-DAB:
Main unit (Interface) This is typically installed behind your dashboard or in a glovebox with extension
cables run to convenient points for connecting your iPod, iPhone, iPad, USB
device or other auxiliary music sources.
Controller The compact, removable controller should be installed within easy reach and has
a high-contrast OELD display with back-lit buttons and a simple rotary control for
easy station selection or control over other connected devices.
Antenna (optional) Any active (powered) DAB antenna with 5V phantom feed and SMB (f) connector
fi ts to EZi-DAB. ALPINE recommends ALPINE KAE-220DA.
Please make sure ONLY to connect a dedicated 5V phantom supplied antenna.
Failure to do so may result in the device becoming defect.
EN
3