De-Register A Handset And Base; Base Pin Code - Uniden DECT1825 Owner's Manual

De-register a handset and base

If you have more than one handset registered to
your base you can de-register a handset or the
bases registered to use.
Before registering, make sure all handsets and the
base are in standby mode.
menu/ok
1 Press to access the main menu.
2 Press or until
Add. Settings
rdl
displayed and press menu/ok .
3 Press or to display Deregister
rdl
and press .
menu/ok
4 Press or to select or
Handset
rdl
and press .
Base
menu/ok
5 Press or to display the handset or
rdl
base you want to de-register and press
6 Press or to select Yes and
rdl
menu/ok
press .
If the handset has been registered to the base
successfully, you will hear a confirmation tone.
7 Press to exit and return to standby.
end

Base PIN code

You need to enter the base PIN code when you are
registering handsets. For security reasons you may
wish to change the PIN code. You can choose a
PIN code up to 4 digits long.
If you reset the base from the handset, base PIN
code will be 0000.
is Always keep a record of your base PIN code. Note
your PIN code and keep it in a safe place.
If you change the PIN code you will need to use the
new code for any handset registered to your base.
menu/ok
1 Press to access the main menu.
2 Press or until
rdl
displayed and press menu/ok
. 3 Press or to display
menu/ok
rdl
menu/ok
press .
4 Press to exit and return to standby.
end
[29]
is
Base Settings
.
Base Pin and