Shifting Gears - Bajaj Pulsar 135 LS User Manual

Table of Contents

Advertisement

How to Ride your Bike

Shifting Gears :

Close throttle & depress the clutch.
Shift into next higher or lower gear.
Open the throttle and release the clutch lever slowly
and simultaneously.
Gear Shifting Lever & Gear Shifting Sequence
WARNING : When shifting down to lower gear, do
not shift at such a high speed that the engine rpm
rises excessively and which may cause the rear
wheel to skid.
Braking :
Close the throttle completely, leaving the clutch
engaged (except where shifting gears) so that the
engine braking will help slow down the motorcycle.
13
Shift down one gear at a time so that you are in
Neutral when you come to a complete stop.
When stopping, always apply both brakes at the
same time. De-clutch as necessary to keep the
engine from stalling.
Never lock the brakes, or it will cause the tyres to
skid. When cornering, use brakes judiciously and do
not de-clutch. Reduce your speed before you get
into the corner. For emergency braking, disregard
downshifting, and concentrate on applying the
brakes as hard as possible without skidding.
Stopping the Vehicle :
Close the throttle completely.
Shift the transmission into neutral.
Bring the vehicle to complete stop.
Turn the ignition switch off.
Parking :
Shift the transmission into neutral and turn the
ignition switch OFF.
Support the motorcycle on a firm level surface with
the center or side stand.
CAUTION : Do not park on a soft or steeply
inclined surface or the motorcycle may fall over.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents