Moving Off; Shifting Gears - Bajaj Pulsar 150 DTS-i Owner's Manual

Hide thumbs Also See for Pulsar 150 DTS-i:
Table of Contents

Advertisement

How to Ride Your Bike
CAUTION : Do not operate the starter continuously
for more than 5 sec. After 3 continuous attempts of
cranking, the function gets disable for 20 sec.
NOTE : The motorcycle is equipped with a starter
lockout switch. The vehicle can start in any gear when
clutch lever is depressed.
It is recommended to start the engine with the
transmission in neutral.

Moving Off :

Check that Center/Side stand is up.
Depress the clutch lever.
st
Shift into 1 gear.
Open the throttle and release the clutch lever slowly
and simultaneously.
As the clutch starts to engage, open the throttle a
little more, giving the engine just enough rpm to
keep it from stalling.

Shifting Gears :

Close throttle & depress the clutch.
Shift into next higher or lower gear.
Open the throttle and release the clutch lever slowly
and simultaneously.
Downloaded from
www.Manualslib.com
manuals search engine
Gear Shifting Sequence
WARNING : When shifting down to lower gear, do
not shift at such a high speed that the engine rpm
rises excessively and which may cause the rear
wheel to skid.
Braking :
Close the throttle completely, leaving the clutch
engaged (except where shifting gears) so that the
engine braking will help slow down the motorcycle.
Shift down one gear at a time so that you are in
Neutral when you come to a complete stop.
Never lock the brakes, or it will cause the tyres to
skid. When cornering, use brakes judiciously and do
not de-clutch. Reduce your speed before you get
into the corner. For emergency braking, disregard
downshifting, and concentrate on applying the
brakes as hard as possible without skidding.
Gear Shifting Lever
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents