Technical Specifications - Bajaj Pulsar 135 LS User Manual

Technical Specifications

Engine : 4 stroke DTS-i, Single cylinder
Natural air cooled.
Bore x Stroke : 54.0 mm x 58.8 mm
Eng. Displacement : 134.66 cc
Compression Ratio : 9.8:1
Idling Speed : 1400 rpm
Max. Net Power : 13.5 Ps @ 9000 rpm
Max. Net Torque : 11.4 Nm @ 7500 rpm
Ignition System : DC, Micro controller based digital
CDI with Trics
Spark Plug (2 Nos) : CHAMPION, BOSCH
Spark Plug Gap : 0.6~0.7 mm
Lubrication : Wet sump, Forced.
Transmission : 5 speed constant mesh.
Front Brake : Hydraulic operated 240 mm disc
brake
Rear Brake : Mech. expanding shoe 130 mm
Fuel Tank Capacity :
: 8 liters
Full
: 2.5 liters
Reserve
: 1.6 liters
Usable
Dimensions :
: 1995 mm
Length
Width : 765 mm
Height : 1045 mm
Wheel base : 1325 mm
Ground clearance : 170 mm
Tyre Size Front : 2.75 X 17", 41 P
Rear : 100/90 X 17", 55 P
Tyre Pressure Front : 1.75 kg/cm (25 psi)
Rear (Solo) : 2.00 kg/cm (28 psi)
Rear (Pillion) : 2.25 kg/cm (32 psi)
Electrical System : 12 Volts DC
: 35/35W
Head Lamp
: 5W (2 nos.)
Pilot lamp
: LED
Neutral
: LED
Reserve Indicator
Tail / Stop Lamp : LED
Turn Signal Indicator : LED
Side indicator Lamp : LED
Hi Beam Indi. Lamp : LED
Speedometer Lamp : LED
Fuel Gauge : LED bar display
Horn : 12 V DC 2A
Battery : 12 V 5 Ah MF
Rear No. Plate Lamp : 5W
Vehicle Kerb Weight : 122 kg.
Gross Vehicle Weight : 252 kg.
Max. Speed : 115 km/hr.
Climbing Ability : 26% max.
Note : All dimensions are under UNLADEN condition.
Above information is subject to change without any notice.
2
2
2
}
(inside cluster)
(With single rider 68 kg)
2